Floor Mounted Electrical Telescopic Bleacher Seating With Arm
Feature of Telescopic Bleacher Seating : Most of the telescopic tribune seating are placed in the conference hall, auditorium hall and stadium, gym, or some pubilc sport center. It can be closed and opened by electric control.
Telescopic Bleacher Structure: cold-rolled steel rear cross beam,front cross beam and brace beam dealt with powder coating.
Q235 Steel plate framework is One-batch forming.
Description of motor and power system of Telescopic Bleacher Seating:
(1) During operation, it can cooperate with a movable control switch to perform forward and backward.
(2) Imported deceleration motor is used to drive gear transmission, and the special wide PU friction wheel is used to rub against the floor to promote the movement of the stands. All motors in each part realize the expansion and contraction of independent modules, and special codes are equipped to ensure parallel between modules. Each code is controlled by a computer system.
(3) The driving system can ensure that when encountering ground defects and obstacles, it provides sufficient power and does not run off the track.
Drive mechanism: Electric control type, with infrared remote control and limited manual control. It adopts imported three-phase geared motor with electric power of 0.55KW and voltage of 380V. It has the characteristics of large reduction ratio, high efficiency, low noise, few failures and long life. The anti-deflection device is installed to ensure that the movable stand can be easily extended and contracted without deviation. The telescopic mechanism is flexible, has low working noise and does not scratch the floor.
It can be matched with a variety of styles of seats: low back, high back folding plastic seats, folding soft-pack seats, seats with armrests, etc., styles are optional. The plastic seat material is: high-density polyethylene (HDPE), the soft seat material: fireproof fiber + ergonomic memory foam.
In addition to the weight of the seat itself, the stand should also meet the following loads: dynamic load per square meter of 450kg; per meter length can withstand a swing load of 36kg;
Fixed railings are used on both sides of the stands, which are made of steel material (matt), and there is no need to plug and unplug when the stands are stowed. The guardrail design meets the following horizontal forces: the top end meets the requirements of 65kg per meter, the middle of the guardrail meets the requirements of 135kg per meter, and the lateral force 50Kg/m does not loosen or deform.
The Telescopic Bleacher Seating can withstand a rated load of 140 kg per seat.
| Specifications |
| Product | Telescopic Bleacher Seating |
| Material | Chair: Cold molded foam chair |
| Structure Frame: Cold roll steel dealt with powder coating,grey color |
| Flooring: 18mm plywood with anti-slip finish or covered by carpet, Or alumium floor |
| Safety Railing: Steel with powder coating or Stainless steel is optional |
| Chair Type | Foldable Arm chair |
| Installation Type | Floor mounted type |
| Bleacher Type | Manual/Semi-Motorized/Ful-motorized |
| Operation | Wire control or remote control (Moterized type) |
| Color of Steel Structure | Black or Grey |
| Railings | Safety Railing on two sides of the bleacher, backside railing is optional |
| Step Height | 260mm,280mm,300mm |
| Step Width | 700-900mm |
| Stair Step Width | 800-1000mm |
| Packing | PP woven bag, Carton, Air bubble film |
| MOQ | 100 seats per set |
| Delivery Time | 25-30 days according to the quantity |
| Application | Stadium, Conference Hall, Theatre, School, Exhibition Center,etc. |
Product Tags:
|
|
Plywood Backrest Electrical Telescopic Bleacher Seating With Arm Images
|
